Shruti Engineering

Failsafe Brake (Electro Magnetic Disc Barke)are normally in the applied (braking) condition. When electric supply is given, the brake is released and the shaft free to rotate. In case of power failure or cut off, the brake is instantaneously applied thus preventing accidents.

Brake Motor is combination of three phase Squirrel Cage Induction Motor with Electro-Magnetic Disc Brake (A.C.) When power is switched off with ordinary motor, the rotating part will stopped after some time but if brake motor is used rotating mass will stop instantaneously. All Brakes are mounted at non-driving end of motor, braking disc is mounted directly on motor shaft. Brakes are directly acting, no lever or links are required. Liner plate is only wearing part and this is easily replaceable.

• Model No.-2H EH 720 HHD
• Range- 1 to 10amps
• Input- 230 V AC to 440 V AC
• Output- 96 V DC to 190 V DC

• Size OR Model : From 08 to 14
• Torque : From 8 Nm. to 150 Nm.
• Power Consumption : From 20 Watt to 140 Watt
• Hub Bore Dia. : From 10 MM to 70 MM
• AC Input Voltage : 415 V AC (Most Common AC Input Voltage),110 V AC, 230 V AC
• DC Brake Coil Voltage : 190 V DC (Most Common Used Brake), 24 V DC, 96 V DC, 105 V DC, 205 V DC (Can customized other coil voltages on request)
• Supply Phase : 2 Ph. 415 V AC
• Operating Frequency : 50 Hz. (+/- 5%)

• Insulation Class	F
  Brake Disc Thickness	12MM
  Country of Origin	Made in India
  Voltage	190 , 24
  Material	Cast Iron
  Phase	SINGLE  Phase
  Usage/Application	Brake Motors

• compatible WITH  0.5 HP MOTOR

OD 150

HUB BORE – 32,34,35,38,P

HUB LENGTH 30

TEETH 26

We are engaged in presenting an extensive range of EOT Crane Brake Liner to our clients. Moreover, clients can buy these liners at competitive prices.
Features:
– Longer service life
– Lightweight
– Excellent in work

• Braking torque: 1.5-600 Nm
• 9 sizes in CSA-CUS design
• DC voltages: 24, 103, 180, 205 V
• Thermal class F (155 °C)
• Preset air gap
• Braking torque can be reduced (module E)
• Long rotor/hub guide with low rate of wear
• Manual release facilities for all sizes
• Air gap and wear monitoring (optional)

• Size OR Model : From 08 to 14
• Torque : From 8 Nm. to 150 Nm.
• Power Consumption : From 20 Watt to 140 Watt
• Hub Bore Dia. : From 10 MM to 70 MM
• AC Input Voltage : 415 V AC (Most Common AC Input Voltage),110 V AC, 230 V AC
• DC Brake Coil Voltage : 190 V DC (Most Common Used Brake), 24 V DC, 96 V DC, 105 V DC, 205 V DC (Can customized other coil voltages on request)
• Supply Phase : 2 Ph. 415 V AC
• Operating Frequency : 50 Hz. (+/- 5%)

• Insulation Class	F
  Brake torque	32NM
  Country of Origin	Made in India
  Voltage	190 , 24
  Material	Cast Iron
  Phase	SINGLE  Phase
  Usage/Application	Brake Motors

• compatible WITH  1 HP MOTOR

TORQUE 32 NM

OD 150

MOTOR FRAME 100L

3 HP

TORQUE 80  NM

OD 189

MOTOR FRAME  132S

7.5   HP

TORQUE 60 NM

OD 165

MOTOR FRAME 112M

5  HP

TORQUE 150 NM

OD 217

MOTOR FRAME  132M

10 HP/12.5HP/15 HP

We, Shruti Engineering, are an appreciated manufacturer, exporter and supplier of high quality Disc Brakes and Industrial Hoists. Offered range of products includes Foot Mounted Brake Motor, Disc Brake and Liner Brake.

We, Shruti Engineering, are an appreciated manufacturer, exporter and supplier of high quality Disc Brakes and Industrial Hoists. Offered range of products includes Foot Mounted Brake Motor, Disc Brake and Liner Brake.

A Fail Safe Crane Brake is a heavy-duty braking system engineered to provide maximum safety and reliability in crane operations. Designed on the fail-safe principle, the brake is applied automatically when electrical power is switched off, ensuring complete load holding and accident prevention in the event of power failure or emergency stop.

The brake uses a spring-actuated mechanism with electromagnetic or hydraulic release, ensuring powerful braking action and controlled stopping of crane motions such as hoisting, cross travel, and long travel. Manufactured from high-grade cast iron or steel, it delivers high torque, smooth performance, and long service life even under continuous crane duty.

Key Features:

• Fail-safe design: brake applies when power is off.

• High torque braking for heavy crane loads.

• Rugged and compact design for continuous duty.

• Electromagnetic / hydraulic release system.

• Smooth, noise-free, and vibration-free braking.

• Long service life with minimal maintenance.

A Disc Type DC Brake Motor is an electric motor equipped with a compact and efficient disc-type electromagnetic brake that operates on DC voltage. This brake is spring-loaded and automatically engages when the power supply is switched off, providing immediate stopping and safe load holding. When DC voltage is applied to the brake coil, the disc is released, allowing the motor shaft to rotate freely.

These motors are widely used in machinery requiring quick, reliable braking and frequent start-stop operations, ensuring maximum safety and precision. Built with high-quality materials and robust design, disc type DC brake motors deliver long service life, high torque, and consistent performance.

Key Features:

• Integrated disc-type DC electromagnetic brake

• Fail-safe operation (brake applied during power failure)

• Quick response time for safe and precise stopping

• High starting torque with reliable load holding capability

• Available in various power ratings and mounting types

• Low maintenance and long operating life

An AC Electromagnetic Disc Brake 50Hz is a reliable industrial braking system designed to operate on a standard 50Hz AC power supply. Built on the principle of spring application and electromagnetic release, the brake ensures fail-safe performance—engaging automatically when power is cut off to stop motion instantly and safely.

The disc-type design offers high braking torque, quick response, and compact construction, making it suitable for frequent start-stop operations in heavy-duty machinery. Manufactured with precision and durable materials, these brakes deliver long service life, low maintenance, and consistent braking performance, even in demanding industrial conditions.

Key Features:

• Operates on 50Hz AC supply

• Fail-safe braking: spring-applied, power-released

• High braking torque with fast and precise stopping

• Rugged, compact, and low-maintenance design

• Suitable for continuous and heavy-duty applications

• Available in multiple torque ratings and mounting styles

DC Brake Shoe Liners are high-quality friction materials designed for use in DC brake shoe assemblies, ensuring safe, reliable, and consistent braking performance in industrial and lifting equipment. These liners provide the necessary friction surface for effective stopping, smooth operation, and secure load holding, making them a critical component in fail-safe DC brake systems.

Manufactured with asbestos-free, eco-friendly materials, DC Brake Shoe Liners are engineered to withstand high torque, heavy loads, and elevated temperatures, ensuring long service life and minimal maintenance. Available in a wide range of sizes, thicknesses, and grades, they are suitable for various DC brake systems across industries.

• Specially designed for DC brake shoe assemblies

• Asbestos-free, environmentally safe friction material

• High torque capacity with superior wear resistance

• Excellent thermal stability for continuous-duty operation

• Smooth, noise-free, and reliable braking

• Available in multiple sizes and customized grades